Salt Spray Test Chamber CZ-TB-500/1600/2000CY

 

This equipment is mainly used to detect discontinuities such as pores or other defects in metals and their alloys, metal coatings, organic coatings, anodic oxidation films, and conversion films. This salt spray machine laboratory uses thermal radiation heating to maintain the required temperature of the testing space, thereby ensuring the accuracy of the test.

 

Technical Parameters

Model	CZ-TB-500CY	CZ-TB-1600CY	CZ-TB-2000CY
Internal dimensions (mm)	1000x650x720	1600x800x1000	2000x800x1000
External dimensions (mm)	1700x1400x1000	2300x1600x1250	2700x1600x1250
Temperature range of lab	RT+5°C~60°C
Saturation bucket temp range	RT~70°C
Humidity range	≥90RH
Salt water spray volume	1~2ml/(h · 80cm2) (Collect for at least 16 hours and take the average)
Spray Pressure	70~170KPa
PH value	6.5~7.2/3.0-3.2
PH value of the collection liquid	6.5~7.2/3.1-3.3
Sample placement angle	20 ± 5 ° (inclined from the vertical plane)
Internal/External Box Material	Inner titanium plate, outer stainless steel plate baked with paint
Spray method	Continuous spray, periodic spray, self selection
Control accuracy	Temperature deviation: Soil 2.0 ° C
Control system	Color LCD touch screen controller
Power Supply	AC220V 50/60HZ single-phase two-wire+protective grounding

 

Product Introduction

This equipment is mainly used to detect discontinuities such as pores or other defects in metals and their alloys, metal coatings, organic coatings, anodic oxidation films, and conversion films. This salt spray machine laboratory uses thermal radiation heating to maintain the required temperature of the testing space, thereby ensuring the accuracy of the test.

Product Structure Features

● The inner box of the equipment is made of TA1 pure titanium plate with full welding

 

● The outer box of the equipment is made of stainless steel plate with baking varnish

 

● The sealing cover of the laboratory is made into an inclined surface to prevent condensed water from dripping onto the sample surface

 

● Water and electricity separation structure, easy to clean

 

● The pressure air barrel adopts SUS304# stainless steel high-pressure barrel for best insulation effect

 

● Beautiful appearance, click the box cover lifting button to automatically open or close the box cover

 

● The lab seal adopts silicone sealing strip sealing method to ensure that the corrosive gas in the box does not leak

 

● Moving casters and positioning foot cups are installed at the bottom of the box body, which can be easily moved and positioned

Meets the Test Standards

● IEC60068-2-11-1981                           Salt spray test method

● ASTM.B117-2011                                    Salt spray test

● ASTM-B368-09                                   Standard test method for copper acetate and salt spray test (CASS Test)

● JIS H8502                                             Salt water spray test method

● GB/T10125-2021/ISO9227:2017          Salt water spray test method

● GB-T5170.8-2008                                Inspection method for environmental test equipment for electrical and electronic products-Salt spray test                                                                               equipment

● GB-T5170.11-2008                                Inspection method for corrosive gas testing equipmen

● GB-T10587-2006                                Technical conditions for salt spray test chamber

 

● GBT 20121-2006/ISO11474-1998       Corrosion of metals and alloys - Corrosion test in artificial atmosphere Intermittent salt spray - Outdoor                     

TAG: